Transfer Paper - 008

SIZE
4 inch x 5 inch

HOW TO APPLY TRANSFER PAPER

- For the best results, we recommend using white or light-colored clay. This will enhance the colors of the transfer paper and keep it closest to the original design.
- Prep your clay by conditioning it and rolling it onto a tile surface. Make sure the clay is well secured to the tile by using an acrylic roller. 
- Place the transfer paper colored/printed side down onto the well-conditioned clay. 
- Use an acrylic roller to apply light pressure and ensure the design fully contacts the clay. I roll up and down about 2-3 times.

HOW TO DISSOLVE TRANSFER PAPER:

- Take your tile with the clay slab and hold it under very low-pressure running water. (The paper backing will begin to dissolve and wash away.)
- Use your finger to gently rub away any remaining paper until you achieve a smooth texture. (Be careful not to apply too much pressure! If too much pressure or time under the water is applied the design will become distorted.)
- Pat dry with a paper towel.
- Let the clay slab dry completely before cutting it and bake as usual. 

To increase the durability of the transferred design, we recommend sealing your finished piece with a sealant such as resin for a shiny finish, or any matte sealant for a matte finish.

Please note that the colors may slightly change during baking.

If you have any questions about sizing or how to use your transfer sheets, please feel free to contact us.